Expansion and modernization of the cracker plants and the refrigeration system to increase ethylene and propylene production by 50,000 TPA

Construction of a new ISO C4 plant for the direct production of high-purity isobutene from feedstock of the metathesis plant; world‘s first application of a newly developed technology from OMV and BASF; construction incl. storage tanks and tank car loading

Construction of a Solution-Styrene-Butadiene-Rubber (SSBR) pilot plant for the production of test samples of synthetic rubber for the tire industry

Design and construction of a process plant for the production of 4,000 TPA fully synthetic waxes from polyethylene and polypropylene by depolymerization

Revamp of a butadiene extraction plant to increase plant capacity

Revamp of the polypropylene pilot plant using the Borstar process

General planning for the extension of a polyethylene plant with a black coloring. The feedstock comes from the PE plant co-planned by Pörner in 2005

Capacity expansion of a polymere compounding plant, built in 1997, for the production of PE- and PP-compounds with filler contents up to 70% (e.g. glass fiber, talc, glass beads, BaSO4), semiconductive compounds (PP, PE, PS), master batches for various applications (coloring, flame-retardant, ...), high purity and food grades, compounds of specialities and many more.

Installation of a polyethylene-large-scale plant using the Borstar process

Construction and expansion of a pilot plant for polymer fibre production for the production of ceramic composites

Modernization of the ammonia plant at the Linz site: conversion of the synthesis gas and exhaust gas cooling systems to a secondary cooling circuit to decouple from the Danube cooling water

Modernization of the fertilizer plant at the Linz site: conversion of the synthesis gas and exhaust gas cooling systems to a secondary cooling circuit to decouple from the Danube cooling water.

Modernization of the nitric acid plant at the Linz site: conversion of the synthesis gas and exhaust gas cooling systems to a secondary cooling circuit to decouple from the Danube cooling water.

Dismantling of two melamine plants and revamp of two further melamine plants, including construction of a new wastewater treatment plant

General planning of a production plant for wax and polymer emulsions as ‚smart factory‘ with

complete cross-linkage of production, logistics and infrastructure. An own cogeneration unit for

environmentally friendly generation of electricity and heat saves 50% of CO2 emissions

Plant for the production of 180,000 TPA formalin (55 %) under compliance with Russian norms and standards

Expansion of the existing facilities to increase production capacity of methylcellulose in Bitterfeld and to increase blending and loading capacity in Bomlitz

New plant for the production of epoxy resins from bisphenol and epichlorohydrin as an extension of the existing resin plants LH1 to LH3

Conversion of a laboratory building for plant nutrients without interrupting laboratory operations, including laboratories for product control, changing rooms and offices

Re-installation and modernization of a formalin plant including methanol tanks and infrastructure

Installation of a production plant of bisphenol TMC from phenol and acetone

Modernization of Ammonium plants, Urea plant, utilities and Urea storage facilities

Exchange of 2 process control systems with measuring points, apparatus and machines, total MCCs, low-voltage distributors, USVs & emergency power generators incl. cabling

Turn-key formalin plant based on the Dynea silver catalyst process incl. methanol and formalin tanks and methanol unloading station

Construction of a hexamine production plant and supply including GOST-R certificate

Construction of a plant for the production of formalin based on Dynea‘s silver process

Expansion of the polyester and alkyd resin plant; Follow-up contract to new installation in 2006

Installation of a plant for the production of bisphenol F

General planning and construction of a production plant for high-tech catalysts for the „gas-to-liquid“ process, the first of its kind worldwide

Installation of a plant for the production of epoxy resins

Installation of two plants for mixing, filling and storage of flammable liquids (Organika 2 for DONAU-KANOL) and in a follow-up order for liquid chemicals (Anorganika 3 for DONAUCHEM)

Installation of a production plant for unsaturated polyester and alkyd resin

General planning for the construction of a formalin plant based on Dynea‘s silver process

General planning for the installation of a synthetic resin production plant under reconstruction and extension of existing buildings

Engineering of a plant for production of BP-TMC made of phenol and acetone

Turn-key supply of a formalin plant

Construction of a Biturox® plant for the production of road paving bitumen

Installation of a Biturox® plant for production of road grade bitumen

2nd generation Biturox® pilot plant with electronic visualization system and 2 reactors with a 7.5 kg and 15 kg capacity

2nd generation Biturox® pilot plant with electronic visualization system and 2 reactors with a capacity of 12 kg and 24 kg

Construction of a Biturox® plant and a cut-back bitumen mixing station for the production of road bitumen

Installation of a Biturox® plant including tank farm and truck filling station

Installation of a new Biturox® bitumen processing plant for production of special road grade and industrial bitumen inkluding tank storage and truck filling stations

Planning and construction of a mobile high-performance melter for melting bitumen

Installation of a new Biturox® bitumen processing plant for production of special road grade and industrial bitumen

Engineering and installation of a high-performance melter terminal for re-liquefying cold bitumen

Installation of a green-field Biturox® plant including storage tanks and filling station.

Each of the two reactors is 20 m high with a diameter of 3.6 m. Production capacity up to 800,000 MTPA by continuous operation

Installation of a Cooling & Packing Unit for automated packing of bitumen for cold storage. Filling capacity 200.000 TPA. This allows the supply of high quality road paving bitumen seasonally independent, even at -20° C degrees.

Installation of a Cooling & Packing Unit for automated packing of bitumen for cold storage. Filling capacity 200.000 TPA. This allows the supply of high quality road paving bitumen seasonally independent, even at -20° C degrees.

Cooling & Packing Plant for cooling and packaging bitumen

Installation of a Biturox® plant for high quality road paving bitumen, branding of the Biturox bitumen brand

Construction of a cooling and packing unit for cooling and packaging bitumen with two terminals

Turn-key planning and installation of a Biturox® plant for high quality road paving bitumen including tank farm and filling station

Installation of a new Biturox® bitumen processing plant for production of special road grade bitumen

Cooling & Packing Unit for cooling and packaging bitumen

Revamp of an existing bitumen plant using Biturox® technology

Installation of a bitumen plant using Biturox® technology

Installation of a bitumen plant using Biturox® technology

Installation of a bitumen plant using Biturox® technology

Turn-key installation of a bitumen plant using Biturox® technology

Installation of a bitumen plant using Biturox® technology

Revamp of an existing bitumen plant using Biturox® technology

Capacity expansion of an existing mixing unit for polymer modified bitumen and integration of a new product storage tank

Engineering and construction of a plant to treat water from the Main River with a pure water capacity of 1,100 cubic meters per hour to supply the companies at Industriepark Höchst

HyLube3 plant for the production of API base oils of groups III/III+ based on used oil

EI&C engineering for a production plant for the production of 100% recycled paper, corrugated board and cardboard; consisting of the two core units stock preparation and paper mill

TAF supplies a pyrolysis pilot plant turn-key for the research of low-temperature gasification of various feedstocks and mixtures of plastics; feedstocks expandable to biomass

Planning and execution of the integration of the new photovoltaic plant into the plant’s 6kV power grid at the Borealis site in Schwechat

Overall planning of a thermal processing plant of various biomasses from agricultural

residues (e.g. straw, hemp, flax), the wood industry (e.g. damaged wood, sawmill residues

bark) and fast-growing plants (e.g. Chinese silver grass) for the production of pulp. The pilot

plant enables research of alternative processes, adjustment of technical parameters, and

minimization of energy and chemical input

Supply and commissioning of a produced water treatment plant for subsequent re-injection into the reservoir with a capacity of 164 m³/h (extension stage 1) and 82 m³/h (extension stage 2); Execution on behalf of Siemens

General planning and construction of a multi-fuel conversion plant for the recovery of phosphorus and synthesis gas from sewage sludge

Study for the construction of a demonstration plant to produce 1,000 l/d of renewable

jet fuel from CO2 and water from ambient air as well as renewable power, Proof of

both technical and economic feasibility

Construction of a 1 MW pilot plant for the production of synthesis gas from torrefied waste wood with plans for expansion to a 25 MW plant

Engineering support for the design and construction of the New Safe Confinement (NSC), the new safety shield for a damaged nuclear power station

General planning of a plant for the production of high-quality bio-silicates from rice hull ash based on the Pörner Bio-Silicate Technology. The demonstration plant is specifically designed to define and

optimize key parameters of the process for different customers

Supply and commissioning of a produced water treatment plant with subsequent re-injection into

the reservoir with a capacity of 41,6 m³/h (6,300 BWPD); Execution on behalf of Siemens

Supply and commissioning of a river water treatment plant consisting of coagulation,

flocculation, sedimentation and degassing with a capacity of 33 m³/h (5,000 BWPD) for

subsequent re-injection into the reservoir; Execution on behalf of Siemens

Modification of the HyLube 2 plant to the production of base oil group III quality from used oil. The used oil treatment is carried out by stronger hydrocrack refining and extended catalytic treatment

Design and construction of a process plant for the production of 4,000 TPA fully synthetic waxes from polyethylene and polypropylene by depolymerization

Supply and commissioning of a produced water treatment plant with subsequent re-injection

into the reservoir with a capacity of 100 m³/h (15,100 BWPD); Execution on behalf of Siemens

Supply and commissioning of a produced water treatment plant with subsequent re-injection into the reservoir with a capacity of 100 m³/h (15,100 BWPD); Execution on behalf of Siemens

General planning of a exhaust gas-desulfurization plant subsequent to a nickel plant consisting of 25 sub plants, for 95% reduction of sulfur dioxide emissions, to be constructed under extreme weather conditions above the Arctic Circle with a sulfur capacity of 600,000 TPA

Installation of a 5,8 MW Back Pressure Turbine for electricity production with HP/MP (high pressure/medium pressure) and MP/LP steam back pressure with 6 kV/50Hz electric power generator

Supply and commissioning of a produced water treatment plant with subsequent re-injection

into the reservoir with a capacity of 100 m³/h (15,100 BWPD); Execution on behalf of Siemens

Supply and commissioning of a produced water treatment plant with subsequent injection in the reservoir with a capacity of 67 m³/h (10,200 BWPD); Execution on behalf of Siemens

Treatment of river water to boiler feed water with ultra-filtration, cation exchanger for decarbonisation, reverse osmosis, CO2 degassers and subsequent multistep ion exchangers with a flow rate of 300 m³/h (expansion stage 1) and 100 m³/h (expansion stage 2); Execution on behalf of Siemens

Carbon dioxide liquefaction and filling plant using CO2 from upstream bioethanol production for further processing in the food sector

Planning and installation of the connecting systems and piping for the Rhine harbor steam power plant unit 8 (incl. district heating, process water, cooling water, process waste water and compressed air as well as heating systems)

New construction of a used oil treatment plant (HyLube 2) based on the technology of UOP

Production of 15,000 TPA of synthetic diesel fuel and 2.3 MW of electricity from 65,000 TPA of biomass (mainly wood), based on pyrolysis, gasification, synthesis gas purification and conditioning, Fischer-Tropsch synthesis, electricity and oxygen production

General planning and installation of Austria’s largest bioethanol plant with a bioethanol production

capacity of 240,000 m³/year and an investment volume of EUR 125 Mio. Within 7 months the

environmental impact assessment (EIA) was approved and in 14 months the plant was built on time

and on budget. The bioethanol, made from renewable raw materials, is blended with fuel.

Boiler feed water treatment with cation exchanger, CO2 degassers, anionic exchanger and subsequent mixed bed filter with a flow rate of 180 m³/h for the ion exchanger and 360 m³/h for the mixed bed filter stage; Execution on behalf of Siemens

General planning for the installation of a recycling plant for production of 30.000 t pure plastics out of 40.000 t electronic scrap and wastes from car recycling

Installation of a 390 MW gas-fired combined cycle power plant with a gas turbine including a heat recovery boiler and a condensing steam turbine; high earthquake resistance of a power and district heating plant

Condensate treatment with activated carbon filters, condensate cooling system and subsequent, ion exchanging step with a flow rate of 450 m³/h; Execution on behalf of Siemens

General planning of central blower unit of blast furnace A (steam boiler, steam turbine, blast compressor, utility and gas piping, civil and steel structure and infrastructural equipment) and engineering of electrical, instrumentation and PLC for blast furnace A

Expansion of the energy and district heating power plant Coolkeeragh

Installation of a pilot plant for polymeric fibre production

Engineering of a laboratory building with a total area of approx. 4,400 m2 (basement, ground floor, upper floor, attic)

Engineering and construction of a sterile sample train for parenteral cephalosporin agents with H2O2 material lock and aseptic work isolator

Extension of a protein pilot plant incl. related laboratory rooms for the production of GMP-compliant clinical samples and bio-pharmaceutical proteins

Engineering and construction of a capture chromatography plant for the purification of protein solvents by column chromatography

Optimization / modernization of existing purified water production plants

Construction and modernization of ventilation units in new and existing production halls, control rooms and laboratories under different regulations (natural ventilation, noise protection, cross-contamination, air conditioning, minimized shut-downs,...)

Extension of the laboratory experimental plant by 10 new mini-fermentation units and a new sterilizer (autoclave)

Construction of a training center for trainees in biochemical process engineering, with laboratories and apparatus of all necessary media systems

Implementation of a fungiculture plant with an unique cultivation process in bottles

Engineering support for the expansion of the LNG terminal with the construction of a third tank,

increase in gasification and storage capacity, expansion of the port infrastructure and the dosing

point at the entry point (2017), for second expansion (2016), for first expansion (2007), for new

installation (1999)

Modernization of a Vapor Recovery Unit (VRU) by an upstream arranged Carbon Retrofit Unit (CRU) to increase the re-liquefied amount of hydrocarbons by the fuel loading of trucks, vessels and ships

Turn-key construction of a LPG loading station for tank trucks with a capacity of 240 TPD

Revamp of a natural gas reduction plant with exchange of the whole installation at the prime line (grid gas connector, pre-heating, pressure reducing valve)

Installation of an air separation plant

Engineering for the revamp and expansion of a liquid gas loading plant incl. safety engineering

Installation of a gas reducing station of the combined heat and power station "Salzburg Mitte"

Installation of an air separation plant

Revamp of the Aderklaa I natural gas processing plant with a capacity increase from 1.3 to 1.9 million m³/day

Revamp of gas storage plant Reyersdorf, Phase 2

Expansion of the processing units of a natural gas storage field including expansion of drying capacity (new drying unit)

Development of a partially remote-controlled and automated flushing system, the Modular Drainage Flushing System Bahn (MDB02) for cleaning tunnel drainage systems; a small series of prototypes is in planning

Planning of an efficient cooling water supply for the frequency converters as part of the modernization of a dedusting fan in the electric steelworks; savings of 40-60 % in electrical energy

Revamp of the steam network and pipe racks at Linz Chemical Park incl. 3D model using laser scans

Planning for a crystalline betaine production plant with a production capacity of 8,500 TPA. The betaine obtained from beet molasses is used in the cosmetics and food industries

Construction of a screening plant for BioAgenasol (organic solid fertilizer) to separate various grain sizes including an automatic packing unit

General planning for a 3-storey loft conversion at the headquarters of the Pörner Group was a static challenge for the building, which dates back to the 19th century. The three additional floors (about 750 m³) were placed as a steel construction on new load distribution bars made of reinforced concrete. The wall structure was carried out in glass, timber and drywall constructions. In the courtyard, a lift was installed and in its shafts the entire HVAC-system was reinstalled.

Reconstruction and relocation of a food production adjustments for infrastructure according to the hygienic, technical requirements, thermal and structural refurbishment of production, storage areas and administration buildings

Capacity expansion of a baby food production including a 4-floor building expansion, connection to the existing production line, construction of a storehouse with truck loading stations

General contractor for the engineering and construction of a new ship loading and unloading station for grain and feed incl. infrastructure

Capacity expansion of a wax moulding unit for candle manufacturing, pharmaceutical, cosmetics and food industry

Turnkey-construction of a administration building with 2.000 m² usable floor space incl. cloak room

General planning for the expansion of of an existing bitumen roofing and sealing membrane plant; Adding a second production line, debottlenecking of the ancillary facilities

Architecture, planning and engineering of the „Energiewelt“ showroom building in Vienna; completed in only four months with highest possible energy efficiency and at reasonable project costs

Revamp of the bitumen emulsion plant with energy savings of up to 80 %

Construction of a winery with the most modern equipment for the production of white and red wine

Pörner has been planning and constructing for Shell in Austria since 1992. Currently, the Shell stations are being equipped with a new store concept.